FAAC C721 24v Electric Sliding Gate Motor

The FAAC C721 24V Low-voltage gearmotor is suitable for residential sliding gates. Recommended maximum gate weight 500KG

• Adjustable Open & Closing Speed
• Virtual Encoder for reversal
• Direct Drive & Easy Manual Release
• Capable of Continuous use
• Electronic control board with anti-crushing device and virtual encoder with reversing function when detecting an obstacle
• Magnetic limit stops
• Vibration and noise reduction
• Optional Transformer in separate box available when poser source is at a distance from the motor
• Solar Friendly – Optional Solar Kit is available
• Global Access recommend the use of a range increasing antenna to improve transmitter signal strength!

Model Variants Available:
• 24v Sliding Gate Motor, 1 x Two Channel Receiver, 2 x Transmitters, E721 Control Board
• 24v Sliding Gate Motor, Transformer in Separate Enclosure, 1 x Two Channel Receiver, 2 x Transmitters, E721 Control Board

NOTE:
• Gate requires a bottom rail of at least 100mm x 50mm
• Not suitable for gates on an incline!